The is a replica of the jacket style worn by Freddie Spencer, the American rider who raced for Rothmans Honda-HRC in the mid-1980s. This guide covers who Spencer was at Honda, what the replica jacket contains and how the protection ratings are defined.
Freddie Spencer at Rothmans Honda
In 1985 Spencer competed in both the 250cc and 500cc Grand Prix championships for Rothmans Honda-HRC and won both titles in the same season. Health problems followed, and according to the 1986 season page he took part in only two races that year (Spain and Austria) and suffered from carpal tunnel syndrome. For collectors, the jacket recalls the Rothmans Honda colours from that period. Browse more or the wider range of .
What the Replica Jacket Includes
The product page describes an inspired-by replica in season-accurate blue and white. The listed construction is:
- 1.2-1.3 mm drum-dyed milled cowhide for abrasion resistance.
- 100% polyester mesh lining.
- Pre-curved sleeves for the riding position, with stretch Cordura panels at the sleeves and calves.
- YKK semi auto-lock coil zippers and safety stitching.
- Removable shoulder and elbow protectors listed to EN 1621-1:2012 (CE Level 2, per the page) and a removable back protector compatible with EN 1621-2.
- Speed hump and perforation choices, plus one inner mesh chest pocket.
What the Protection Standards Mean
EN 1621-1 covers impact protectors for the limb joints, such as shoulders and elbows, and sets limits on the force a protector may transmit: Level 1 requires a mean below 35 kN (no single value above 50 kN) and Level 2 a mean below 20 kN, according to Wikipedia. EN 1621-2 covers back protectors with its own, stricter limits. Both standards define two performance levels, and a lower transmitted force indicates more protection, according to SATRA. A standard describes how the armour was tested, not a promise of injury prevention.
Written by the Leather Collection Editorial Team.




