USA 
Brazil 
Germany 
France 
Italy 
Switzerland 
Sweden 
Spain 
Great Britain 
Norway 
Russia 
South Africa 
Japan 
New Zealand 
Australia 
Tom Sykes raced the new BMW S 1000 RR for the BMW Motorrad WorldSBK Team in the 2019 WorldSBK season. His second place at Misano gave the bike its first podium in the championship, as reported in a BMW Group press release.
The , available at Leather Collection, is a replica inspired by his 2019 BMW Motorrad WorldSBK season. Leather Collection has made hand-stitched, made-to-order gear since 2009.
Key Takeaways
- Sykes rode the BMW S 1000 RR for the BMW Motorrad WorldSBK Team in 2019.
- The jacket is a replica inspired by that season, not the garment he raced in.
- The product page lists 1.2 to 1.3 mm cowhide, removable shoulder and elbow armour described as CE Level 2 and a removable spine protector; the page also lists CE Level 2 as a separate add-on, so confirm what is fitted by default.
- Armour levels (EN 1621) and garment classes (EN 17092) are different standards.
Sykes and BMW in 2019
moved to BMW for 2019 after leaving the Kawasaki Racing Team, where Leon Haslam replaced him, as Crash.net reported. His team-mate on the BMW was Markus Reiterberger. Riders who like his earlier Kawasaki years can look at the .
Materials and Construction
The product page lists drum-dyed cowhide leather of 1.2 to 1.3 mm, safety stitching, stretch panels at the sleeves and calves, a 100% polyester mesh lining and pre-curved sleeves. The hand-stitched construction is relevant to how seams behave under load, although no jacket can promise a particular outcome in a crash.
Protection Features
The product page lists removable armour at the shoulders and elbows described as CE Level 2 (EN 1621-1:2012), a removable spine protector described as compatible with EN 1621-2, and TPU elbow sliders. The same page also lists CE Level 2 (EN 1621-1:2012) as a separate add-on option, so it does not make clear whether that level is fitted by default; confirm this before ordering. The page does not state an EN 1621-2 level for the spine protector, and it names no test certificate. For EN 1621-1, SATRA gives the Level 1 limits as a mean maximum transmitted force below 35 kN with no single value over 50 kN; Level 2 is the stricter tier, with a mean below 20 kN. These figures describe the insert alone. Whole-garment classes under EN 17092 are a separate matter, and the product page states no EN 17092 class.
The page also lists carbon-reinforced metal shoulder protectors and speed hump options. For a comparison with other race cuts, see the range or the .
Fit and Comfort
Pre-curved sleeves follow the arm position on the handlebars, and the mesh lining helps with moisture. Racing cuts are intentionally close, so the size should be chosen with the riding position in mind; made-to-measure sizing is available.
The BMW Motorrad Look
The product page lists black, blue, red and white options for this replica.
Final Thoughts
The Sykes 2019 jacket suits BMW fans who want a season-specific replica with removable armour. Check the product page for the exact specification and options.
Updated: October 2026
Frequently Asked Questions
What did Tom Sykes ride in the 2019 WorldSBK season?
He rode the new BMW S 1000 RR for the BMW Motorrad WorldSBK Team. Markus Reiterberger was his team-mate, and a second place at Misano was the first podium for the new bike in the championship.
Is this jacket the one Sykes raced in?
No. It is a replica inspired by his 2019 BMW Motorrad WorldSBK season. The cut, armour and options are those listed on the product page for this made-to-order jacket, not those of his own race leathers.
What does CE Level 2 armour mean?
CE here refers to impact protectors tested to EN 1621-1, the European standard for shoulder, elbow, knee and hip protectors. Level 2 is the stricter of its two levels: the mean force transmitted in the test must stay below 20 kN, against below 35 kN and 50 kN for Level 1. The level describes the insert alone, not the whole garment, and not every crash outcome.
Can a back protector be added to a race-style leather jacket?
Some jackets list a removable spine or back protector, and a separate insert is another option for riders who want one. Only fit a protector the maker states is compatible with that jacket, and ask before buying a separate insert. EN 1621-2 is the standard for back protectors; it has its own Level 1 and Level 2 limits, which cannot be compared with the limb-protector figures because the tests differ. The insert should be the right length for the rider and sit flat against the spine.
Written by the Leather Collection Editorial Team.
