Spiderman Motorcycle Gloves: Red and Silver Race Gloves

Red and silver Spiderman leather motorcycle race gloves, upper view

March 24, 2023 246 view(s) 4 min read

The Spiderman Leather Motorbike Race Gloves are race-fit motorcycle gloves in a red and silver colourway inspired by Marvel's Spider-Man. They combine a cowhide shell with protective inserts, so the design suits riders who like the character and want gloves with real riding features. This post goes through the design, the construction listed on the product page, and what to check on any pair of motorcycle gloves.

Key Takeaways

The gloves come in a red and silver chrome colourway inspired by Spider-Man and are made to order in sizes XS to 3XL.
The product page lists 0.8-0.9 mm cowhide, TPU sliders on the palm, thumb and fingers, and integrated flexible knuckles.
A pre-curved palm and fingers and dual Velcro wrist straps are listed for grip position and a secure fit.
The listing does not state an EN 13594 level, so riders who need a specific rating should confirm it before ordering.

The Design

Spider-Man was created by Stan Lee and Steve Ditko and first appeared in Amazing Fantasy #15 in August 1962, according to Wikipedia. The gloves borrow the character's red and silver palette and apply it to a race-style glove, with the product page naming Red and Silver Chrome as the available colours. They are a replica-style design inspired by the character and are made to order.

Construction and Protection

The product page describes the shell as 0.8-0.9 mm cowhide with a reinforcement between the thumb base and the index finger, an area that sees a lot of wear. Protective and structural details listed include:

Reinforced protectors at the impact zones.
TPU sliders on the palm, thumb and fingers, mounted on poly-foam.
Integrated flexible knuckles.
Leather reinforcement at high-stress zones.
Safety stitching with high-strength nylon thread.

The product page lists TPU sliders on the palm, thumb and fingers; their performance has not been tested to a stated standard.

Fit and Comfort

Among the Gloves in the range, the Spiderman pair is shaped around the riding position. The palm and fingers are pre-curved, which keeps the hand in a natural grip on the bars and cuts down on bunched material in the palm. Rubber protection zones with air intakes and exhaust ports are listed for ventilation.

Closure is by dual Velcro straps at the wrist, so the glove can be tightened and stays in place when the arm is extended. Sizes run from XS to 3XL. A glove should be snug with no folds across the palm, and the fingertips should not be pressed against the end of the glove with a closed fist.

What to Check on Any Motorcycle Gloves

Gloves for riders are covered by EN 13594. According to Intertek, the standard sets minimum performance levels against mechanical risks such as abrasion, cutting, tearing and impact. It defines two levels: Level 1 gloves give protection with low ergonomic penalties, while Level 2 gloves offer increased protection and require knuckle protection testing. The tests cover ergonomics, sizing and cuff length, tear resistance, seam strength and abrasion.

The Spiderman gloves page does not mention an EN 13594 level, so the listing should be read for exactly what is included. Riders who need a particular level, for track days or event rules, should confirm it with the seller before ordering. A rating describes test results on the glove and does not promise protection in a crash.

Matching Gear

The same theme runs through the range. The Spiderman riding leathers carry the colourway onto a full suit, and riders who prefer a plainer look can compare red and white riding gloves . Gloves worn with a jacket or suit should overlap the cuff so that no skin shows when the arms are extended.

Frequently Asked Questions

What are the Spiderman motorcycle gloves made of?

The product page lists a 0.8-0.9 mm cowhide shell with a reinforcement between the thumb base and index finger, TPU sliders on the palm, thumb and fingers, integrated flexible knuckles and nylon safety stitching. Protective inserts sit at the impact zones and the colourway is red and silver chrome.

Do the gloves have a CE or EN 13594 rating?

The product page does not state an EN 13594 level. That standard defines Level 1 and Level 2 gloves, with knuckle testing required at Level 2. Riders who need a specific level for track days or other events should check it with the seller before ordering, since a pair cannot be assumed to meet it.

What sizes and closures are available?

The listing shows sizes from XS to 3XL and dual Velcro straps at the wrist, so the closure can be adjusted. The gloves are made to order. A snug fit with no folds in the palm gives a secure grip on the bars, so measuring the hand against the size chart is worth doing.

Are these Spiderman gloves suitable for everyday riding?

They are described as race-fit gloves, with a pre-curved palm and ventilation zones, The page markets them for track and road riding but states no EN 13594 level, so confirm the rating before track use. Riders who want a looser fit for commuting or touring can compare other gloves in the range. Fit, cuff length and closure matter more than the colourway for daily use.

Written by the Leather Collection Editorial Team.