USA 
Brazil 
Germany 
France 
Italy 
Switzerland 
Sweden 
Spain 
Great Britain 
Norway 
Russia 
South Africa 
Japan 
New Zealand 
Australia 
Leon Haslam rode the BMW S1000RR in the World Superbike Championship in 2011 and 2012. The Leon Haslam WSBK is a replica jacket inspired by that racing style. This guide covers Haslam's BMW years, the construction listed on the product page, and how to read the protection details when choosing a leather riding jacket.
Key Takeaways
- Haslam raced for BMW Motorrad Motorsport in WorldSBK in 2011 and 2012, finishing fifth in 2011.
- The jacket is a replica inspired by his racing style, not equipment supplied by the rider or BMW.
- The product page lists 1.2 to 1.3 mm cowhide, removable EN 1621-1 Level 2 shoulder and elbow armour and a removable back protector.
- Speed hump, perforation and lining options are listed, in black with red as a variant.
- The jacket is hand-stitched and made to order.
Leon Haslam and BMW in World Superbike
Haslam is an English rider, born in 1983 and the son of former racer Ron Haslam, and he races with the number 91. He was runner-up in the 2010 World Superbike Championship and rode for BMW Motorrad Motorsport in 2011 and 2012, finishing fifth overall in 2011 with 224 points and eighth in 2012 with 200 points. Riders interested in him can browse the for related gear.
Materials and Construction
According to the product page, the jacket uses drum-dyed, milled cowhide 1.2 to 1.3 mm thick with dual safety stitches. The other listed features are:
- Structure: two-layer construction with pre-curved sleeves shaped for the riding position.
- Reinforcement: Cordura panels at the sleeves and calves, and external hard protectors at the shoulders and elbows (described on the product page as carbon-reinforced metal).
- Lining: a breathable polyester mesh lining, with a removable lining and a thermal lining upgrade available.
- Zippers: YKK semi-auto-lock coil zippers at the front and cuffs.
- Pocket: one internal left-side mesh chest pocket.
Protection Details
The Leather Jacket Leon Haslam WSBK lists removable armour at the shoulders and elbows, described by the seller as Level 2 and compliant with EN 1621-1:2012, and a removable spine and back protector compatible with EN 1621-2. The page names no test certificate, so riders can ask to see the test marking on the armour itself. According to Wikipedia, EN 1621-1 limb protectors reach Level 2 when the mean transmitted force stays below 20 kN, against below 35 kN for Level 1, and a Level 2 back protector must stay below an average of 9 kN, against 18 kN for Level 1.
Armour tested to these standards is separate from how the jacket as a whole is rated. According to SATRA, EN 17092 assesses motorcycle clothing for abrasion on a Darmstadt machine, along with tear and seam strength. The product page does not state an EN 17092 class for this jacket, so riders who need a certified jacket for a track organizer should confirm the documentation first.
Options and Fit
The jacket is hand-stitched and made to order. Speed hump choices are standard, ventilated or hydro, and perforation can be none, chest, front or full. A riding jacket should be measured with the arms extended forward, since sleeves that are cut for a normal standing posture can ride up on the bike. Pre-curved sleeves are intended to reduce this effect.
Styling Beyond the Track
The jacket is described as a Leon Haslam season livery replica with an aggressive racing silhouette, in black with red available as a variant. Riders who prefer a less race-focused look can compare the , while those who want a jacket with armour and weather resistance can look at the .
Updated: October 2026
Frequently Asked Questions
Is this the jacket Leon Haslam wore at BMW?
No. It is a replica jacket inspired by Leon Haslam's WSBK racing style. It is not equipment supplied by the rider or by BMW, and the design follows the product page, which describes a season livery replica with a racing silhouette.
What armour does the jacket list?
The product page lists removable armour at the shoulders and elbows, described by the seller as Level 2 and EN 1621-1:2012 compliant, plus a removable spine and back protector compatible with EN 1621-2. Level 2 limb armour must keep the mean transmitted force below 20 kN in the standard impact test. Riders can ask for the test marking on the armour itself.
What leather is the jacket made from?
The product page lists drum-dyed, milled cowhide 1.2 to 1.3 mm thick, with dual safety stitches and a two-layer construction. Cordura panels are used at the sleeves and calves, and the lining is a breathable polyester mesh.
What options can be chosen?
The product page lists a standard, ventilated or hydro speed hump, perforation on the chest, front or full, and a thermal lining upgrade with a removable lining. The jacket is hand-stitched and made to order, in black with red available as a variant.
Written by the Leather Collection Editorial Team.
