Aleix Espargaró Suzuki Jacket MotoGP 2016: Ride with Authentic Racing Style

Aleix Espargaro Suzuki MotoGP 2016 racing jacket in metallic blue front view
November 19, 2022 189 view(s) 4 min read
Aleix Espargaró Suzuki Jacket MotoGP 2016: Ride with Authentic Racing Style

The Aleix Espargaro Suzuki 2016 MotoGP Racing Jacket MotoGP 2016 is a leather riding jacket inspired by the gear Aleix Espargaró wore with Team Suzuki Ecstar in 2016. It is hand-stitched and made to order, and its racing cut works for sport riding as well as for everyday wear.

Key Takeaways

  • Inspired by the gear Aleix Espargaró wore at Team Suzuki Ecstar in the 2016 MotoGP season.
  • The product page lists a metallic blue colourway referencing the 2016 Suzuki livery.
  • Drum-dyed milled cowhide shell with pre-curved sleeves and removable protectors listed to EN 1621.
  • Speed hump, perforation and made-to-measure sizing are chosen when ordering.

Aleix Espargaró and Suzuki in 2016

Aleix Espargaró and Maverick Viñales rode the Suzuki GSX-RR for Team Suzuki Ecstar in 2016. Espargaró's time with the factory team ended after that season, when Alex Rins was signed for 2017 and 2018 (Roadracing World). The jacket is inspired by his 2016 gear, and the colourway on the product page references the Team Suzuki Ecstar livery of that year. More of the rider's gear is listed under Aleix Espargaro gear , and Rins-era Suzuki items include the Alex Rins Suzuki 2018 suit .

Leather and Construction

The product page describes 1.2 to 1.3 mm drum-dyed milled cowhide. Cowhide is a common choice for riding apparel because it is thick and resists abrasion. The listed details are:

  • Pre-curved sleeves for the riding position.
  • Accordion stretch panels at the elbows and lower back, and Kevlar-look Cordura reinforcement at the sleeves (the listing does not state that it contains Kevlar).
  • YKK semi-auto-lock coil zippers at the front and cuffs.
  • Polyester mesh lining with one inner chest pocket.

Protection

The product page lists removable CE Level 2 protectors at the shoulders and elbows under EN 1621-1:2012, a removable spine protector compatible with EN 1621-2 (a compatibility statement, not a certification), external TPU-reinforced metal shoulder protectors and TPU elbow sliders. The page also offers CE Level 2 as an add-on, so confirm what is included; no test certificate is shown. EN 1621-1 covers limb joint protectors and defines two performance levels; a lower transmitted force means a more protective rating (SATRA overview). The standard rates the protector, not the jacket, and fit matters because a protector only helps where it sits.

Options and Sizing

Choices made when ordering include the speed hump (none, standard, ventilated or hydro) and perforation (none, chest, front or full). Men's sizes run from US 32 to 50 and women's from US 6 to 20, and made-to-measure custom sizing is also offered. For related Suzuki-themed items, see the Suzuki GSX-R leather jacket and Suzuki racing gloves .

Wearing It On and Off the Bike

The jacket suits fans of Aleix Espargaró and Suzuki racing design, sportbike and street riders, and anyone moving from a fashion leather jacket to a riding cut. Off the bike it pairs with jeans and boots. Other replica jackets are collected in MotoGP replica jackets , and the wider range is under MotoGP 2016 .

Updated: October 2026

Frequently Asked Questions

Which season does this jacket refer to?

It refers to the 2016 MotoGP season, when Aleix Espargaró rode for Team Suzuki Ecstar alongside Maverick Viñales. The product page lists a metallic blue colourway that references the Suzuki livery from that year, and the year in the product name marks the season the design refers to.

Is this an official Suzuki or team jacket?

No. It is an inspired-by replica made by Leather Collection and is not affiliated with Suzuki, Team Suzuki Ecstar or the rider. The design references the 2016 season, and the construction follows the specification on the product page.

What do the EN 1621 references mean?

EN 1621-1 is the European standard for limb joint impact protectors and EN 1621-2 covers back protectors. Both define Level 1 and Level 2, and a protector that transmits less force in testing earns the higher level. The standard rates the protector, not the complete jacket.

Can the jacket be made to measure?

Yes. The product page offers standard sizes and made-to-measure custom sizing. Each jacket is hand-stitched and made to order, so the speed hump, perforation and size are chosen before production begins. Accurate measurements at checkout matter most for fit.

Written by the Leather Collection Editorial Team.

Previous article:
Next article:
Related posts
Comments
Leave your comment
Your email address will not be published